STIHL MS 181 C-BE Manual de Instruções Página 54
- Página / 140
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
52
markings on the file holder – rest the
file holder on the tooth head and the
depth gauge
N File only from the inside outward
N The file only sharpens on the
forward stroke – lift the file on the
backstroke
N Do not file tie straps and drive links
N Rotate the file a little periodically in
order to avoid uneven wear
N To remove file burr, use a piece of
hardwood
N Check angle with file gauge
All cutters must be equally long.
With varying cutter lengths, the cutter
heights also vary and cause rough
running of the saw chain and chain
breakage.
N All cutters must be filed down equal
to the length of the shortest cutter –
ideally, one should have this done
by a servicing dealer using an
electric sharpener
Depth gauge setting
The depth gauge determines the depth
to which the cutter penetrates the wood
and thus the chip thickness.
a Required distance between depth
gauge and cutting edge
When cutting softwood outside of the
frost season, the distance can be
increased by up to 0.2 mm (0.008").
Lowering the depth gauges
The depth gauge setting is lowered
when the cutter is sharpened.
N Check the depth gauge setting after
each sharpening
N Lay the appropriate file gauge (1)
for the chain pitch on the saw chain
and press it against the cutter to be
checked – if the depth gauge
protrudes past the file gauge, the
depth gauge must be reworked
Saw chains with humped drive link (2) –
upper part of the humped drive link (2)
(with service mark) is lowered at the
same time as the depth gauge of the
cutter.
WARNING
The rest of the humped drive link must
not be filed; otherwise, this could
increase the tendency of the chain saw
to kick back.
N Rework the depth gauge so that it is
flush with the file gauge
N Afterwards, dress the leading edge
of the depth gauge parallel to the
service mark (see arrow) – when
doing this, be careful not to further
lower the highest point of the depth
gauge
689BA023 KN
a
Chain pitch Depth gauge
Distance (a)
Inches (mm) mm (Inches)
1/4 P (6.35) 0.45 (0.018)
1/4 (6.35) 0.65 (0.026)
3/8 P (9.32) 0.65 (0.026)
0.325 (8.25) 0.65 (0.026)
3/8 (9.32) 0.65 (0.026)
0.404 (10.26) 0.80 (0.031)
2
689BA061 KN
1
689BA051 KN
689BA044 KN
- STIHL MS 171, 181, 211 1
- Instruction Manual 2
- Manual de instrucciones 2
- 67 - 137 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions and 5
- Working Techniques 5
- 001BA275 KN 7
- 001BA113 KN 10
- 001BA114 KN 10
- 001BA087 LÄ 11
- 001BA031 KN 12
- 001BA082 KN 12
- 001BA257 KN 15
- 001BA035 KN 16
- 001BA174 KN 17
- 001BA037 KN 19
- 001BA038 KN 20
- 001BA033 KN 20
- 001BA051 LÄ 21
- 001BA088 LÄ 22
- 001BA143 KN 23
- 001BA150 KN 23
- 001BA144 KN 24
- 001BA145 KN 24
- 001BA147 KN 24
- 001BA148 KN 25
- Cutting Attachment 27
- 533BA001 KN 28
- 143BA003 KN 28
- Mounting the Bar and Chain 29
- (quick chain tensioner) 29
- 135BA011 KN 30
- 001BA229 KN 33
- 001BA240 KN 33
- 001BA218 KN 33
- 001BA219 KN 33
- Chain Lubricant 36
- Winter Operation 39
- Starting / Stopping the 39
- 001BA140 KN 40
- Operating Instructions 44
- 533BA019 KN 47
- 533BA020 KN 47
- 533BA021 KN 48
- Spark Arresting Screen in 49
- Spark Plug 49
- 000BA071 KN 50
- Chain Sprocket 51
- Maintaining and Sharpening 52
- Maintenance and Care 56
- Main Parts 58
- Specifications 60
- Maintenance and Repairs 62
- Disposal 63
- STIHL Incorporated Federal 63
- Emission Control Warranty 63
- Statement 63
- California Exhaust and 65
- Evaporative Emissions 65
- Control Warranty Statement 65
- STIHL Incorporated 65
- Trademarks 67
- Contenido 69
- Acerca de este manual de 70
- Medidas de seguridad y 71
- 001BA234 KN 75
- 001BA238 KN 75
- 001BA239 KN 75
- 001BA040 KN 91
- 001BA146 KN 91
- 001BA153 KN 91
- Accesorio de corte 96
- Montaje de la espada y 98
- 142BA063 KN 100
- 001BA112 KN 100
- 142BA064 KN 101
- Llenado de combustible 102
- 001BA158 KN 106
- 143BA011 KN 107
- 143BA024 KN 107
- 143BA012 KN 108
- 533BA003 KN 108
- Arranque / parada del motor 109
- 143BA018 KN 110
- 143BA019 KN 111
- 143BA020 KN 111
- 533BA004 KN 112
- 533BA005 KN 112
- 533BA006 KN 112
- Cuidado de la espada 114
- 533BA002 KN 115
- 533BA008 KN 115
- 533BA009 KN 116
- Ajuste del carburador 117
- Chispero en el silenciador 118
- 000BA039 KN 119
- Almacenamiento de la 121
- Revisión y sustitución del 121
- 689BA027 KN 122
- 689BA021 KN 123
- 689BA025 KN 123
- 689BA018 KN 124
- 689BA043 KN 124
- 689BA023 KN 124
- 689BA051 KN 125
- 689BA044 KN 125
- 689BA052 KN 125
- Componentes importantes 128
- Especificaciones 130
- 000BA073 KN 133
- Marcas comerciales 138
- Injection 139
- *04585338621D* 140
Manuais e produtos relacionados com Motosserras elétricas STIHL MS 181 C-BE
(12 páginas)
(140 páginas)Bulldog Security Zdalne rozruszniki podręczniki użytkownika
Lista Bulldog Security Zdalne rozruszniki produkty zawierają 5 instrukcje obsługi do modeli 5. Wszystkie podręczniki użytkownika w formacie pdf są dostępne do pobrania lub obejrzenia online.
Comentários a estes Manuais